|
Return to HAM KENWOOD - HF Transceivers
TS-50S in detail:
160 m ~ 10 m amateur band operation
The TS-50S offers transmit/receive performance equivalent to that of most large
HF transceivers on the market. All modes -- LSB, USB, CW, AM and FM -- are
built-in.
AIP (Advanced Intercept Point)
Further enhancing the first-class receiver performance of the TS-50S -- with a
significantly reduced noise floor level -- is our AIP system. This exclusive
circuit design is capable of raising dynamic range to 105 dB.
Powerful menu system
User-friendliness enters a new dimension with these versatile menus. First
featured on the top-of-the-line TS-950SDX, this system allows the operator to
select CW full or semi break-in, change repeater sub-tone, adjust microphone
UP/DOWN step size, and perform many other operations using just a few keys. The
menus are also accessible via the supplied microphone.
DDS (Direct Digital Synthesizer) with step logic control
We've introduced step logic control circuitry to enable the main encoder to tune
smoothly from 5 Hz steps to fast forward mode. The operator may also select
torque settings: high for mobile use, low for stationary applications.
Comprehensive interference reduction
CW reverse mode
This reverses the pitch of interference competing with the CW signal,
allowing the operator to approach the desired signal from either side.
All-mode squelch
The squelch circuit effectively suppresses undesirable background noise when
there is no signal present.
Switchable AGC circuit (SLOW/FAST)
AGC (automatic gain control) can be changed via the menu system. This
ensures optimum receiver operation in SSB, AM and CW modes under all signal
strength conditions.
IF shift
The IF passband is moved away from interfering signals, thus maximizing gain
and signal-to-noise ratio.
Noise blanker
Pulse-type interference, such as ignition noise, can be eliminated.
20 dB RF attenuator
100 memory channels
The TS-50S is equipped with 100 channels for independent storage of transmit and
receive parameters such as frequency, mode, and filter setting. Memory shift
(for transfer of data to the VFOs), memory scroll, and memory protect functions
are also provided.
Easy-to-use scan functions
The memory channels can be scanned either continuously or in groups; channel 99
stores the upper and lower limits for programmable band scan. Scan speed is
variable, and selected channels can be skipped without data loss using the
lock-out function. The TS-50S also offers a carrier-operated scan stop mode.
Dual VFOs (A and B)
VFO data is stored independently for each band, so even after switching bands
the previously used frequency will still be available.
TF-SET
Provided for split-frequency operations and DX applications, TF-SET is available
when the receive frequency is locked, so the operator can avoid losing a
targeted DX station.
Multi-function microphone supplied
The TS-50S is similar to our other VHF mobile transceivers in more than just
looks: this HF rig is compatible with remote-control microphones featuring 4
programmable function keys.
Optional external antenna tuner (AT-50)
Accurate tuning, even at band edges, is initiated simply by pressing the AT TUNE
key on the TS-50S. Band data is transferred to the tuner, so there is no need to
operate the AT-50 directly and it can be installed in an automobile trunk. (The
optional PG-4M is required to mount the AT-50 remotely.)
Other Features:
- RF output power control (100 W, 50 W, 10 W)
- Auto-mode capability
- Full break-in and semi break-in
- Large LCD panel with digital bar meter
- Auto power-off
- Optional 500 Hz CW filter (YK-107C)
- Optional automatic antenna tuner (AT-50 or AT-300)
- Optional SO-2 temperature-compensated crystal oscillator
(TCXO)
- Optional computer interface adapters (IF-10D, IF-232C)
Please note that not all features and options may be
available for the model sold in your region.
Operation of DTSS, Pager, DTMF, and CTCSS is subject to local regulations.
|