 CODE
: 2271The PRYME PMC-100
is perfect for the casual ragchewer.
Made of heavy polyurethane and metal
for durability">
|
| |
CB
VOX system:
 |
2248
VOX Set Handsfree for mobile CB 6 PIN ( see picture)
2249
VOX BOX Handfree Adaptor BOX for mobile 6 PIN
|
Desk microphones:
|
CODE
: 2271 The PRYME PMC-100
is perfect for the casual ragchewer.
Made of heavy polyurethane and metal
for durability, this mic not only looks great, it also sounds great.
· Great-sounding
electret microphone element
·
Flexible, metal gooseneck for desktop use
·
Channel Up/Down controls
·
On-the-air LED indicator
·
Momentary and locking Push-To-Talk keys
·
Powered by 2 AA batteries (not included)
·
Audio gain control for matching the output of
the microphone correctly to the radio
·
Select either FM mode for increased voice
clarity, or SSB mode for that extra punch when contesting
AV24 K/Y (to specified Kenwood or Yaesu)
8 pin adaptor cable CODE
: 2272
AV73 K/I (to specified Kenwood or Icom) RJ45 adaptor cable
RJ45/RJ45 CODE : 2273 |
2274 AMB+4
2276 MP6000/P6
2277 AMB+7 |
ADONIS DESKTOP MICROPHONE
AM-308
|
*High-quality low-noise Mic. Amp built-in.
*Highly sensitive condenser microphone and flexible gooseneck employed.
*Voice quality selector switch for FM/SSB.
*Equipped with electronic touch switch for PTT operation.
( With LED TX indicator )
*Provided with UP and DOWN switches.
*Usable with microphone cable equipped with power feeding line ( ''D''
series cables).
*Connectable with every transceiver available in the market by the
conversion cables (microphone interconnecting cables ) optionally
available.
*Microphone : Wide-band Electret Condenser Mic. with IC
Built-In.
*IC : 1 piece
*Transistor : 7 pieces
*Diode : 5 pieces
*Output Voltage : 0 - 30 mV ( RMS )
*Output Impedance : 500 - 100k ohms
*Power Voltage : DC 3 V ( UM 3 x 2 pcs.)
''D'' series Mic. Connecting Cord : DC 5 V - DC 9 V
*Power Consumption : 1.5 mA ( RX ) 2.5 mA ( TX )
*Dimensions ( mm ) : 100 (W) x 155 (D) x 310 (H)
*Weight : 450 g |
AM-508E
|
*High-quality Compressor Amp. built-in.
Capable of sending our constant voice level regardless of voice,
whispering, loud, etc.
*Provided with High-sensitivity Electret Condenser Microphone.
The Electret Condenser Microphone ensure the better voice quality.
*Provided with FM/SSB Audio Quality Selector Switch.
*Provided with Electronic Switches.
*Usable with microphone cable equipped with power feeding line ( ''D''
series cables).
*Connectable with every transceiver available in the market by the
conversion cables ( microphone interconnecting cables ) optionally
available.
*Microphone : Electret Condenser Microphone
*IC : 1 piece
*Transceiver : 16 pieces
*Diode : 6 pieces
*Output Voltage : 0 - 30 mV ( RMS )
*Output Impedance : 500 - 100K ohms
*Compressor Level : 45dB ( HIGH ) 10dB ( LOW )
*Power Voltage : DC 3 V ( UM3 x 2 )
*Power Consumption : 2mA ( RX ) 3mA ( TX )
*Dimensions ( mm ) : 100 (W) x 155 (D) x 310 (H)
*Weight : 450 g |
AM-708E
|
*Selectable for 2 sets of
transceivers at once by slide switch.
*High Sensitivity Electret Condenser Microphone Element equipped.
*High Quality Compressor Amplifier ( High - Low selectable ) built-in. It
sends out always constant and optimum level
without distortion regardless of audio input level.
*Equipped with FM/SSB Audio Quality Selector Switch for optimum operation.
The Electret Condenser Microphone ensure the clearer voice quality in FM
condition and ensure the better voice quality in the SSB condition.
*Non-Modulation Prevention Circuit built-in.
After continuous transmitting for a few minutes, the alarm circuit will be
activated with alarm sound for 30 seconds.Then, the condition returns to
receiving mode automatically.
*Battery-Check Circuit built-in.
Turn the power switch on ( by selecting ''FM' or ''SSB'' position ), and
the level meter indicates the battery condition with power voltage for a
few seconds.
*Connectable with the microphone interconnecting cable provided with power
feeding line. ( ADONIS terminal arrangement indicates it as ''B'' in the
center of connector.)
*Usable with microphone cable equipped with power feeding line ( ''D''
series cables ).
*You can choose the power source from dry batteries ( UM 3 x 2 ) or
transceiver ( microphone connector DC 5 - 9V/
20mA minimum).
*Microphone : High Sensitivity Electret Condenser Mic.
*IC : 2 pieces
*Transistor : 20 pieces
*Diode : 13 pieces
*Compressor Level : HIGH : 45dB LOW : 35dB
*Output Voltage : COMP : 0 - 30 mV ( RMS ) MANUAL : 0 - 70 mV ( RMS )
*Matching Output Impedance : 500 ohms - 100k ohms
*Power Voltage : Battery : DC 3 V ( UM3 x 2 pieces )
Mic. Cable ''D'' series : DC 5 - 9 V
*Current Consumption : at Receiving : 3 mA, Transmitting : 6 mA ( approx )
*Alarm sound : approx. 4.5KHz Intermittent Tone
*Flexible ( Gooseneck ) Pipe : φ 8mm, ( Length : 150mm )
*External Size : 182 (W) x 130 (D) x 322 (H) mm
*Weight : approx 750 g ( Not included dry battery ) |
|
Lead for Adonis desktop microphone
CODE : 2288 |
|
D-88K Adonis Mic Lead with 8-pin Kenwood/Alinco
Plug
D-8MK
Adonis Mic Lead with Modular Kenwood Plug
D-88i
Adonis Mic Lead with 8-pin Icom Plug
D-88C
Adonis Mic Lead with Modular Alinco Plug
D-88Y2
Adonis Mic Lead with 8-pin Yaesu Plug |
HEiL
GM4 mike+TB1: Truly, the full-range microphone for all occasions - FM - AM -
"Hi Fi" SSB
The "Goldline" Full-range Microphone, another
innovative product from Bob Heil was created specifically for full-range
smooth articulate SSB audio with a wide 60Hz-16kHz response. A +4dB peak
@2kHz gives the new Goldline microphone excellent voice articulation along
with it’s “big bottom” low end that is all so important for producing a well
balanced studio quality SSB signal.
“The
most beautiful looking and best sounding microphone developed exclusively
for high quality amateur radio SSB.
Features:
- Equipped with the new full-range mic
element and your choice of HC-4 or HC-5 elements.
- Utilizes the
new Heil exclusive "Light Touch" recess PTT switch.
- Gorgeous new high gloss black lacquer
finish.
- The Goldline "Vintage" is a high impedance
model for use with tube "boat anchor" type radios. A selectable
passive-equalization circuit rolls off last octave and a half which allows
you to match the response to various transmitted 30,000 ohms output
impedance.
- Terminated in a 4 pin broadcast XLR 1-GND
shield, 2-MIC, 3 and 4 PTT
- 1 mfd non-polar decoupling capacitor
installed for ICOM use
- Can be used with SM-1 optional shock mount
|
Mike Accessories:
|
2295
Holder for handmike
|
2290
Mike Tester
|
2292
ECHO CHAMBER 4 PIN
with duo rogerbip
2294
ECHO CHAMBER 4 PIN |
2956
Extension Cable 6 PIN
|
| | |
|
