The VPS02 paging system directly sends coded messages to the user in a easy to interpret coded number form. This system can be successfully used in a very noise environment">

See also car alarm The VPS02 paging system directly sends coded messages to the user in a easy to interpret coded number form. This system can be successfully used in a very noise environment, and allows greater operating distance than other usual vocal paging system. The VPS01 works in a very simple mode: ex: we attribute to n°1=come in the kitchen; n°2=come to the bar; n°3=the bill is ready. In this way we can immediately explain to the waiter what he has to do only by sending a number, and, very important thing, nobody else than the waiter can understand. Every receiver is perfectly equal to the other, and are coded and activated by the station. The user can initially buy the smallest possible configuration (1 transmitter and 1 receiver), and then, when necessary, any more receiver, up to 999. The transmitter can send up to ten different message codes and address them up to 1000 different receivers. Important: You can have an emergency receiver to supply any possible unit fault. The paging system is shipped with antenna and a wall-mount-bracket. VPS02   -   Code : 4090 VPSR02 Code : 4091 VPS02 - Transmitter Station: > Easy installation and set up in minutes > High RF power : 4 Watts,27 MHz citizen band > Frequency modulation (FM) output > Range: up to 4 Km at open space > system code: 1.000 combinations > One station can page 1.000 pagers > Digital recorder stores 5-seconds voice messages for transmission and playback > Message codes: from 0 to 9 > Individual group and general paging > Programmable user code system > 4 digit LED display shows pager number and message code > EEPROM IC keeps system code over 1 year without power supply > SO 239 antenna socket for external telescopic antenna provided Technical specifications   Operating voltage DC 12 V Current drain standby 30 mA max transmitting 800 mA max Transmitting Frequency 26.350 MHz System Codes 1000 combinations Number of possible receiver 1000 Message Code Number 10 (from 0 up to 9) Transmitting Time 30 sec. ±10% RF Transmitting Power 4 W max. Range up to maximum of 4 Km (with external antenna)