ICOM   IC-PCR100   CODE : 3692
The IC-PCR100 is an intelligent PC-based radio scanner that lets you tap into the entire world of radio communications. Controlled from a small, sleek black box and easily installed, the IC-PCR100 allows you to monitor a wide range of communications and all from your PC!

Details:
The IC-PCR100 has receiver coverage from 10kHz to 1300MHz with FM, AM and WFM receiver modes. This lets you monitor diverse communications such as commercial and marine radio, all from your PC. The IC-PCR100 is particularly suited to listening to international broadcast stations all over the world.
You can store receiver frequencies and settings onto your computer hard disk. Memory channels are only limited by free hard disk space or the number of floppies used.

Other Features:
> User friendly installation with an easy to use interface.
> S-Meter squelch is built in for receiving only signals stronger than the pre-set level.
> ANL function (Auto Noise Limiter) reduces noise when operating in AM mode.
> RF attenuator to help reduce interference from strong local signals.
> Band scope function. This makes it easy to find busy frequencies and to observe receiver frequency band conditions.
> Multiple scanning functions allow you to search for signals quickly and effectively.
> S-meter squelch which blocks annoying signals allowing you to receive signals that you want to hear.

Specifications:
> Frequency coverage: 0.010-1300.00MHz (824-849 MHz bands are inhibited for the USA version)
> Modes: FM,AM,WFM
> Dimensions: 131(W)x33.5(H)x154.5(D) mm
> Weight: 500g
> Min PC requirements: Win 95/98

ICOM  IC-PCR1000   CODE : 3693
The IC-PCR1000 is a powerful PC-based radio scanner that connects to your computer providing frequency coverage from 10kHz to 1300MHz with WFM, FM, AM, SSB and CW receiver modes.

Details:
The IC-PCR1000 is a powerful receiver and has three different interface screens that you can use: Communication Receiver Screen: This screen displays the front of a typical communications receiver. Component-type screen: Ideal for those familiar with full function communication receivers. This screen is divided into the following four components: > Tuning, > Mode/Volume> Meter/Scan, > Bandscope.
Radio Screen: This provides the simplest operation and is ideal for monitoring your favourite AM/FM radio stations.
The IC-PCR1000 can store all the frequencies you find and recall them easily. The total number of memory channels is only limited by the size of your hard drive!

The IC-PCR1000 also has the following features:
> Automatic mode. Input a frequency and this function automatically selects the mode, tuning step, filter setting etc according to your pre set requirement.
> Real time bandscope function makes it easy to observe and find busy frequencies.
> IF shift function ensures clear reception, even under crowded band conditions.
> Digital AFC Function (Automatic Frequency Control) which adjusts the receiver to the centre of a ra-dio signal.
> Icom’s original DDS (Direct Digital Synthesiser) system provides super fine tuning resolution to 1 Hz.
> VSC function (Voice Scanning Control) pauses scanning only when modulated signals such as voice or music are received.
> S-Meter squelch is built in for receiving only signals stronger than the pre-set level.
> CTCSS tone squelch decode function.
> RF attenuator to help reduce interference from strong local signals.
> Optional Digital Signalling Processing (DSP) unit which processes signals digitally to reduce unwanted noise.

Specifications:
> Modes: USB, LSB, CW, AM, FM, WFM
> Dimensions: 127.5(W) x 30(H)x199(D)mm
> Weight: 1kg
> Min PC Requirements: Win 3.1/95/98